- Name: Backersafe Immersion Heating Elements
- Manufacturer: Backer
- Category: Immersion Heating Elements Water Treatment
Backersafe Immersion Heating Elements
Backersafe Immersion Heater
Backersafe Immersion Heaters are manufactured in a range of Sheath Material, Titanium, Incoloy and Copper. Click for immersion Heater Element Sizes
Backersafe Immersion Heaters are manufactured to the latest Legislation of BSEN60335-2-73. Two specific clauses within this specification are aimed at eliminating the risk of boiling water. The most significant requirement is that the Immersion Heater be isolated from the mains supply, should the primary thermostat fail with the contacts closed, which would allow the water to reach a temperature in excess of 85°C.
Backer manufacture two alternative types of Immersion Heaters to meet the requirement of the standard EN 60335-2-73. Type one is using a non re-settable BT range of rod thermostat, which in addition has a secondary single re-settable button thermostat in series with the main rod thermostat. Type two is using a single BMST range of rod thermostats which incorporates a secondary temperature sensing device and a second set of contacts all contained within the one thermostat.
The “BACKERSAFE” IMMERSION HEATERS ARE MANUFACTURED IN A FULL RANGE OF SHEATH MATERIALS INCLUDING COPPER, INCOLOY 800, INCOLOY 825 AND TITANIUM TO SUIT THE VARYING WATER CONDITIONS AROUND THE COUNTRY.